Advertisement
SHDSL MENU OPTIONS
The Total Access 3000 SHDSL V.35 Menus can be provisioned only through the Total Access 3000 System Controller Unit (SCU), P/N 1181018L1. These options are accessed via the local terminal or remote access via the 10BaseT or TL1
interfaces. Connect a terminal emulator via the RS-232 (DB-9) connector on the faceplate of the SCU. The terminal must be VT100 or compatible and set for 9600 bps, 8 data bits, no parity, 1 stop bit. At the LOGIN screen, enter the
account name and system password. Select ACCESS MODULES from the Total Access Menu. Access the desired SHDSL module by selecting the corresponding slot number.
SHDSL V.35 LTU
Main
Menu
WARRANTY
Warranty for Carrier Networks products manufactured by ADTRAN and supplied under Buyer's order for international use is five (5) years. For a complete copy of ADTRAN's International Equipment Warranty, document number
60000003#I-3: (877) 457-5007, Document #583.
TOTAL ACCESS 3000 SHDSL V.35 LTU MENU TREE
1. Unit Information
1. Unit Options
1. Local
2. Provisioning
2. Remote
2. SHDSL Options
3. G.703 Options
4. Nx64K Options
5. Test Options
1. LTU SHDSL Port
3. Status
2. LTU G.703 Port
3. NTU Nx64k Port
4. NTU SHDSL Port
RAM/ROM Power-on Self Test
4. Test
1. SHDSL Local Loopback
2. SHDSL Remote Loopback
3. SHDSL BERT
4. G.703 Local Loopback
5. G.703 BERT
6. Nx64K Local Loopback
7. Nx64K BERT
1. LTU SHDSL
5. Performance History
2. LTU G.703
3. SHDSL PM Thresholds
6. Terminal Mode
1. LTU
2. NTU
1. Cross-Connect Map
2. Restore Factory Defaults
3. Local Management
4. LT Mode Clk Source
5. Circuit ID
6. Software Update
7. Change Password
8. NTU Auto Provisioning
9. Line Card Service State
10. G.703 Port Service State
11. External Port Alarms
12. Nx64K Port Service State
1. Rate (kbps)
2. SNR Margin Alarm Threshold (dB)
3. Loop Attenuation Alarm Threshold (dB)
1. Tx Clock Source
2. Tx Clock Polarity
3. RTS (Circuit 105)
4. CTS (Circuit 106)
1. ISDN-PRA V3
5. RTS to CTS Delay (ms)
2. G.704 CRC-4 Multiframing
6. DSR (Circuit 107)
3. G.704 Idle Pattern
7. DTR (Circuit 108/2)
4. Customer Spare Bits Insertion
8. RLSD (Circuit 109)
5. Customer Spare Bits Pattern
6. Network Spare Bits Insertion
1. Loopback Timeout (Min)
7. Network Spare Bits Pattern
2. BERT Test Pattern Polarity
8. Network RAI Generation
3. BERT Test Pattern Polarity
9. Network E-bit Generation
4. Nx64K Inband Pattern Detection
5. RL (Circuit 140)
6. LL (Circuit 141)
7. TI (Circuit 142)
1. Dual Sided
2. Custom Transparent
3. Customer Non-Transparent
4. Network Transparent
5. Network Non-Transparent
6. Off
SHDSL Version
Vendor List Number
Vendor Issue Number
SHDSL Version
Vendor Software Version
Vendor List Number
Unit Identification Code (CLEI)
Vendor Issue Number
Vendor ID
Vendor Model Number
Vendor Software Version
Vendor Serial Number
Unit Identification Code (CLEI)
Manufacture Date
Vendor ID
Vendor Model Number
PROM Checksum
Vendor Serial Number
Other Vendor Information
General Status
Aggregate Rate (kbps)
SNR Margin (dB) (Cur/Min/Max)
Loop Attenuation (dB) (Cur/Min/Max)
Errored Seconds (ES)
Severely Errored Seconds (SES)
Unavailable Seconds (UAS)
Code Violations Count (CVC)
LOSW Seconds (LOSWS)
Loopback Status
BERT Status
Alarms
PRICING AND AVAILABILITY 800.827.0807
TECHNICAL SUPPORT 800.726.8663
RETURN FOR REPAIR 256.963.8722
www.adtran.com
61182008L5-22A
Advertisement
