Advertisement
Fig. lOA--Handset Card Replacement
Locking devices for G-type handsets are not
3.05
available. If necessary, for security reasons,
caps may be cemented to the G-type handles. Use
N-170 cement (Armstrong Corp. Co.). The application
shall consist of coating the handle threads from
the top of the base over an area 1/2-inch in length
in two opposite places.
tightened by hand. Additional tightening may be
applied using a 514-type tool, but apply no more
than 112 turn.
4.
CONNECTIONS
Fig. 11 through 24 show internal connections
4.01
for the G-series handsets.
A, B, and C for types of receiver and transmitter
units.
BSP 501-210·102-i06_1974-01-09.jpg
Scanned by Frank Harrell, (Cowboy Frank) Castle Rock, Colorado
The caps shall then be
Refer to Tables
Mar 02, 2012 22:00:42
ISS 6, SECTION SOl-210-102
Fig. 106--H a ndset Card Replacement
Page 9
Advertisement
