Advertisement
TRANSMITTER UNIT
P-80AI OO
TRANSMITTER
3.
MAINTENANCE
3.01
Handles, caps, and grids may be cleaned by
wiping with a clean cloth moistened with
water.
Do
compounds on transmitter, receiver
units, or other component parts of
handseL
the silver-plated contact surfaces
not objectionable and no attempt
should
3.02
Use care when cleaning colored handsets to
avoid marring the finish.
if cleaning does not result in a satisfactory appearance.
3.03
Replace cut, worn, cracked, or badly frayed
cords.
tightness at terminals.
BSP
501-210-102-106_1974-01-07.jpg
Scanned by Frank Harrell, (Cowboy Frank) Castle Rock, Colorado
P-339898
SPRING
Fig. 9-GS.. T ype Handset Assembly
fluids
not
cleaning
use
Discoloration or
be
made to remove iL
Replace handset
Connections should be checked for
P-80G700
HANDSET
HANDLE
P-339897 OR
P-IOE324 COVER
To replace H4CJ cord in handset handle,
3.04
the following procedure should be used:
(1) Fold back the spade-tipped conductors over
cord jacket ahead of grommet, feed through
hole at end of handle (transmitter end), shown
in Fig. lOA.
(2) Pass the leads through hollow handle (folded
or antirust
over), Fig. lOB and C, into the receiver
end of handle.
tarnish
on
(3) Retrieve the two white (receiver leads) lead
ia
loops and pull free (Fig. lOD).
free end of these leads and retract the cord to
obtain the red and black leads at the transmitter
end of the handle (Fig. lOD).
(4) Terminate conductors and replace cord
retainer post (early G series handset) and/or
cup assembly (current G series handset), shown
in Fig. 4 and
(5) Replace transmitter and receiver units and
ass ocia ted caps.
Mar 02, 2012 22:00:00
ISS
6,
SECTION
501-210-102
P-339882
SPRING ASSEMBLY
RECEIVER
( NO
E )
T
P-81G400 BUTTON
P-80A200
RECEIVER CAP
NOTE: EARLY MODEL U-TYPE,
CURRENT MODEL
5.
NI
U
T
LB-TYPE
Hold the
Page 7
Advertisement
