Handling And Using Print Media - Brother DCP-193C User Manual

Chapter 2
Handling and using print
media
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
1 2 mm or greater curve may cause
jams to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a short grain
14
2
1
Paper capacity of the output paper
tray cover
Up to 50 sheets of 20 lb Letter or 80 gsm A4
paper.
Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
2