Sony PCS-DS150 Operating Instructions Manual page 68

Location and Function of Parts and Controls
6 I/1 switch and power lamp
Press this switch to turn the Document
Stand to standby when it is on. The
power indicator will then light in red.
Pressing this switch when the
Document Stand is in the standby state
will turn it on. The power indicator
will then light in green.
7 RGB IN connector (Mini 3-row
D-sub 15-pin, male)
Connects a PC for video input.
8 AUX IN jack (Mini DIN 4-pin)
Connects to the video output jack of
the external equipment.
9 MONITOR OUT jack (Mini DIN
4-pin)
Connects to the video input jack of the
TV monitor. If you cannot use the IR
video transmission function, connect
to the VIDEO IN AUX 1 jack on the
PCS-1600/1600P.
0 DC 8.4V jack
Connects the supplied PCS-AC08, AC
adaptor to this jack.
qa IR (infrared) emitter
Emits the infrared ray.
qs Remote sensor
When operating the Document Stand
with the PCS-R160 Remote
Commander, point it toward this
sensor.
68