Husqvarna 525DEPS Operator's Manual page 7

Safety devices on the product
WARNING:
instructions that follow before you use
the product.
• Do not use a product with defective safety
devices.
• Do a check of the safety devices regularly. Refer
Maintenance schedule on page 16 .
to
• If the safety devices are defective, speak to your
Husqvarna servicing dealer.
To do a check of the throttle trigger lockout
The throttle trigger lockout prevents accidental
operation of the throttle control.
1. Push the throttle trigger lockout (A) and make
sure that the throttle control is released (B).
When you release the handle, the throttle control
and the throttle trigger lockout move back to their
initial positions.
B
2. Release the throttle trigger lockout and make
sure that the throttle control is locked at idle
speed.
3. Push the throttle trigger lockout and make sure
that it goes back to its initial position when you
release it.
1480 - 007 - 15.02.2021
Read the warning
A
4. Make sure that the throttle control and throttle
trigger lockout move freely and that the return
springs operate correctly.
5. Start the product and apply full throttle. Refer to
To start the product on page 14 .
6. Release the throttle control and make sure that
the cutting attachment stops. If the cutting
attachment rotates with the throttle in the idle
position, do a check of the carburetor
adjustments. Refer to
To do a check of the stop switch
1. Start the engine.
2. Move the stop switch to the stop position and
make sure that the engine stops.
To do a check of the vibration damping system
The vibration damping system decreases vibration in
the handles to a minimum which makes the
operation easier. The vibration damping system of
the product decreases the transfer of vibration
between the engine unit and the shaft unit of the
product.
1. Stop the engine.
Maintenance on page 16 .
7