Product Description And Specifications; Intended Use; Product Features - Bosch Professional GDR 120-LI Original Instructions Manual

with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
b) If the replacement of the supply cord is necessary,
this has to be done by Bosch or an authorized Bosch
service agent in order to avoid a safety hazard.
Safety Warnings for Impact
Wrenches
u Hold power tool by insulated gripping surfaces, when
1.600.A00.X5J | 04.2016
performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a "live"
wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
u Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
u Always wait until the machine has come to a
complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
u Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
u In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and
seek medical help in case of complaints. The vapours
can irritate the respiratory system.
u Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery
against dangerous overload.
u The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and the
battery can burn, smoke, explode or overheat.
Product Description and
Specifications
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the
power tool's direct area of working operation and is not
suitable for household room illumination.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Tool holder
2 Locking sleeve
3 Gear selector
4 Fixture for carrying strap
5 Battery unlocking button
6 Battery pack
7 Rotational direction switch
8 On/Off switch
9 "PowerLight"
10 Handle (insulated gripping surface)
19
English |
Bosch Power Tools