Operation Through On-Screen Menus - Sony Trinitron PVM-20S1WE Operating Instructions Manual

Operation through On-Screen
Menus
Menu operation buttons
There are five menu operation buttons on the front
panel of the monitor.
3 >/+ button
B/ C/ LINE/
COMPONENT SDI RGB SYNC
RESET
BLUE UNDER H/V
ONLY SCAN DELAY
4 ./– button
5
RESET button
The following table shows how these five buttons
function when using the menus.
To select menu item
Button
To adjust the item selected
return to the previous menu
MENU
1
EXIT return to the previous menu
decide a selected item
ENTER
2
SELECT select an adjustment item
> move the cursor (z) upwards
3
+
increase selected value
move the cursor (z) downwards
.
4
–
decrease selected value
5
RESET
reset current settings to the factory
setting
1 MENU/EXIT
button
EXT
MENU
AP
E X I T
SELECT
M
4:3
ENTER
2
ENTER/
SELECT
button
The buttons that can be used on the menus and
adjustment screens are displayed at the bottom of the
screen. You can perform menu operation using the
displayed buttons.
Menu
ENTER
Usable buttons
Display of the usable menu operation buttons
Operating procedures
To display the menu, follow this procedure.
1
Press the MENU/EXIT (1) button.
MENU (1 : main menu) appears.
2
Move the cursor (z) to the desired setting menu by
pressing the ./– or >/+ (4, 3) button.
3
Press the ENTER/SELECT (2) button.
The setting menu selected in step 2 appears.
4
Move the cursor (z) to the desired item by
pressing the ./– or >/+ (4, 3) button.
5
Press the ENTER/SELECT (2) button.
The adjustment screen or setting menu selected in
step 4 appears.
For detailed information of menus, see "Functions of On-
Screen Menus" on page 12.
MENU
11