Table of Contents
Advertisement
3. Maintenance
The maintenance requirements for the TRPP 5810 remote pulser/preamplifier are
minimal.
3.1
Preventive Maintenance
Because the TRPP 5810 remote pulser/preamplifier has no moving parts, it does not
require preventive maintenance. Only a regular inspection of the product is
recommended to ensure that the TRPP 5810 unit functions correctly.
3.2
Unit Cleaning
The TRPP 5810 external surfaces can be cleaned when needed. This section provides
the procedure for the appropriate cleaning of the product.
To clean the unit
1.
Ensure the unit is turned off by removing the source of power.
2.
Disconnect all cables.
3.
To bring the instrument back to its original finish, clean the housing with a soft
cloth.
4.
To remove persistent stains, use a damp cloth with a soft, soapy solution. Do not
use abrasive products or powerful solvents that could damage the finish.
5.
Wait until the instrument dries completely before connecting the cables.
DMTA-20070-01EN, Rev. A, October 2014
Maintenance
23
Advertisement
Chapters
Table of Contents
