Figure 1-3 Back Panel Of The Trpp 5810 Unit - Olympus TRPP 5810 User Manual

POWER
The red LED lights up to indicate that the power is on.
12 V IN
This W.W. Fischer D.103 series connector is used to supply power to the unit, from
an external 12 VDC source.
R1 OUT and R2 OUT
These LEMO 00 series connectors are used to connect the acquisition unit inputs
to the TRPP 5810 unit.
P1 IN and P2 IN
These LEMO 00 series connectors are used to connect the acquisition unit outputs
to the TRPP 5810 unit.

Figure 1-3 Back panel of the TRPP 5810 unit

DMTA-20070-01EN, Rev. A, October 2014
Overview of the Product 17