Repair And Modification - Olympus HST-X04 User Manual

Part number
U8775201
U8780329
U8769010
U8767107
—
—
—

Repair and Modification

The HST-X04 does not contain any user-serviceable parts. Opening the instrument
might void the warranty.
In order to prevent human injury and/or equipment damage, do not disassemble,
modify, or attempt to repair the instrument.
Table 2 Ancillary equipment (continued)
Scanner interface adaptor to connect scanners
encoder cables with DE-15 connector to
OmniScan MX2, SX, and FOCUS PX with LEMO
connector scanner interface.
Scanner interface adaptor to connect scanners
encoder cables with LEMO connector to
OmniScan MX with DE-15 connector scanner
interface.
0.3 m long adaptor LEMO female to Bendix male
linking LEMO encoder cable to FOCUS LT.
0.3 m long adaptor DE-15 female to Bendix male
linking DE-15 encoder cable to FOCUS LT.
Various probes, combined with wedges, can be
mounted on the HST-X04 scanner. For more
information, see "Probes" on page 17.
Various wedges, combined with probes, can be
mounted on the HST-X04 scanner. For more
information, see "Wedges" on page 18.
Several OmniScan and FOCUS instrument models
can be used.
Note: An encoder cable adaptor may be required
(see Table 8 on page 28).
CAUTION
Important Information — Please Read Before Use
DMTA020-01EN, Rev. D, September 2016
Description
5