Self-Diagnosis Display/Warning; Indicators - Sony DEV-3 Operating Manual

This product is not recognized by the
computer.
Disconnect devices from the USB jack of the

computer other than the keyboard, mouse,
and this product.
Disconnect the USB cable from the computer

and this product, and restart the computer,
then connect the computer and this product
again in an orderly manner.

Self-diagnosis display/Warning

indicators

If indicators appear on the viewfinder
screen, check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:04:
The battery pack is not an "InfoLITHIUM"

battery pack V series. Use an "InfoLITHIUM"
battery pack (V series) (p. 17).
Connect the DC plug of the AC Adaptor to

this product securely (p. 17).
C:06:
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and

operate this product again.
E::
Follow the steps from  on page 42.


Battery power is low.

The battery pack temperature is high. Change

the battery pack or place it in a cool place.
When the indicator flashes, there is not

enough free space for recording images. Delete
unnecessary images, or format the memory
card after storing the images on other media.
The Image Database File is damaged. Check

the data base file by selecting
 [Setup]  [
(
[Repair Img. DB F.].
The memory card is damaged. Format the

memory card with this product.
Incompatible memory card is inserted (p. 24).


The memory card is write-protected.

Access to the memory card was restricted on

another device.
This product is unsteady. Hold this product

steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The memory card is full. Delete unnecessary

images.
Photos cannot be recorded during processing.

Wait for a while, then record.
(MENU)
Media Settings)] 
GB