Table of Contents
Advertisement
Quick Links
USA
SERVICE OFFICE
Dometic Corporation
2320 Industrial Parkway
Elkhart, IN 46515
574-294-2511
CANADA
Dometic Distribution
866 Langs Drive
Cambridge, Ontario
CANADA N3H 2N7
519-653-4390
For Service Center
Assistance Call:
800-544-4881
INSTALLATION & OPERATING
INSTRUCTIONS
REVISION:
Form No. 3309583.015 5/05
(Replaces 3309583.007)
(French 3309584.013)
©2005 Dometic Corporation
LaGrange, IN 46761
This manual must be read and un-
derstood before installation, ad-
justment, service, or maintenance
is performed. This unit must be in-
stalled by a qualified service tech-
nician. Modification of this product
can be extremely hazardous and
could result in personal injury or
property damage.
Important:
must stay with unit.
Owner read carefully.
X-TEND A-ROOM
TM
INSTALLATION AND OPERATING INSTRUCTIONS
Lire et comprendre ce manuel avant de
procéder à l'installation, à des réglages,
de l'entretien ou des réparations.
L'installation de cet appareil doit être
effectuée par un réparateur qualifié.
Toute modification de cet appareil peut
être extrêmement dangereuse et
entraîner des blessures ou dommages
matériels.
These Instructions
1
RECORD THIS UNIT INFORMATION FOR
FUTURE REFERENCE:
Model Number
Serial Number
Date Purchased
Model
953086.000
953091.000
Patent Pending
Advertisement
Table of Contents
Related Manuals for Dometic X-TEND A-ROOM
Summary of Contents for Dometic X-TEND A-ROOM
- Page 1 X-TEND A-ROOM INSTALLATION AND OPERATING INSTRUCTIONS RECORD THIS UNIT INFORMATION FOR FUTURE REFERENCE: Model Number Serial Number Date Purchased SERVICE OFFICE Dometic Corporation 2320 Industrial Parkway Elkhart, IN 46515 574-294-2511 CANADA This manual must be read and un- Lire et comprendre ce manuel avant de...
-
Page 2: Safety Instructions
X-TEND A-ROOM INSTALLATION AND OPERATING INSTRUCTIONS SAFETY INSTRUCTIONS This manual has safety information and instruc- tions to help users eliminate or reduce the risk of accidents and injuries. RECOGNIZE SAFETY INFORMATION This is the safety-alert symbol. When you see this symbol in this manual, be alert to the potential for personal injury. -
Page 3: Specifications
Product features and specifications as described or illus- trated are subject to change without notice. Installation methods not described in this manual must have written Model 953086.000 953091.000 approval from Dometic Corporation. Min./Max. Min./Max. Important: Read the entire Installation and Operat- A = Length 88-1/2"... - Page 4 X-TEND A-ROOM INSTALLATION AND OPERATING INSTRUCTIONS FIG. 1 FIG. 3 Center Pole Assembly "C" Clip Top Stand Pole Ball Pin Lower Stand Stand Pole Lock Pole Ball Stud Bolt Lever b. Front pole assembly Channel With The front pole contains 11 pieces. When as-...
- Page 5 See Fig. 7. Keep ball ends of side poles at ramp opening/hinge View From Inside Cargo Trailer Looking Out and extend the side poles as much as possible without lifting the X-Tend A-Room off the ramp. The Rear/Frame Pole Assembly FIG. 6 side poles should be at an angle.
- Page 6 The stands are designed to support a total of 1,200 pounds including persons, equipment and ramp. 2. Do not use grills, hibachis, camp stove or gas burning lamps inside the X-Tend A-Room 3. Never operate generators, motorcycles, any internal combustion engines inside the X- Tend A-Room 4.
-
Page 7: Operating Tips
Location For Twist Fastener Roll the fabric assembly tightly around the poles in the pole storage bag squeezing out the air. Insert the Installation fabric and poles into the X-Tend A-Room storage E. Operating Tips bag. Store in a dry place. -
Page 8: Limited One (1) Year Warranty
In order to obtain the benefits of this warranty, you should return the product which you find defective to the Seller named below or to a Dometic Authorized Service Center during the period that this warranty is in effect. The original owner is responsible for all charges incurred in delivery of the product to the Seller, or Dometic Authorized Service Center, and in pick up after the warranty service has been completed.