Auxiliary Input Jack; Changer Control - Blaupunkt Los Angeles CDM147 Owner's Record

Auxiliary Input Jack

Connect other audio equipment, such as a portable cassette or DAT player, through the 500mV/3.5
mm pigtail connector. Access auxiliary equipment output by pressing SRC until "AUX IN" appears.
Adjust volume, bass, and treble settings through the receiver.

Changer Control

Your radio is ready to control a Blaupunkt CD Changer with the DISC Management System, such
as the CDC-A05 or CDC-A071. See your Blaupunkt dealer for more information.
Once changer playback adjustment is complete, CD Changer display sequence follows.
Track Up/Down
Press << and >> to select tracks. Disc No. and Track No. appear. Pressing << will restart current
track if less more than 1 second of track has been played. If less than 1 second has been played,
unit goes to beginning of previous track. Pressing >> in last track will select next disc.
Track Cue and Review
Press and hold >> or << for audible cue or review.
Naming Discs- See page 21.
Disc Select By Name (Disc Up/Down)
Press /\ / V controls to select discs. For easy identification of discs, the disc name appears
immediately (or disc no. if disc not named and identified since magazine was inserted. See Disc
Name Table, below.)
Disc Name List
Allows you to scroll through names of discs in changer without leaving currently-playing disc.
1. Press SRC for more than 1/2 second to enter LIST mode. Small "L" appears in left-most
position of display.
2. Use /\ and V to scroll though names. (Disc number appears if disc has not been named and
identified since magazine was inserted. See Disc Name Table, below.)
3. If you find name of a disc that you want to hear, press < or > and changer automatically goes
to that disc. If no new disc is selected, the LIST mode automatically ends after 5 seconds.
Disc Name Table
Until the changer has the chance to identify the discs in a newly-inserted magazine, the names of
any named discs are not available. When a new magazine is inserted, the changer reads and
identifies the discs' names at the earliest of the following opportunities: Disc Select (automatic or
manual), Disc Scan, or Disc Select during Disc Naming mode or, if you switch to another source
before the discs have been read, the changer automatically reads and identifies the names of the
unread discs in a background scan that lasts at most about 2 minutes, making the names readily
available as soon as possible!
Track Repeat
To play current track repeatedly, press RPT as needed until RPT I appears. If track manually
advanced, RPTI remains active for new track.
Disc Repeat
To play current disc repeatedly, press RPT as needed until RPT II appears. Once all tracks on disc
are played, disc is repeated. If disc manually advanced, RPTII remains active for new disc.
To cancel RPT feature, press as needed until RPT indicator disappears.
Track Mix
Press MIX as needed until MIX I icon appears. This also cancels repeat, scan, and TPM features, if
(When optional CD changer is connected.)
17