Advertisement
USER SERVICING INSTRUCTIONS
1. Grasp plug and remove from the
receptacle or other outlet device. Do not
unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access
cover on top of attachment plug towards
blades.
3. Remove fuse carefully. Insert the tip of your tool into fuse slot (close with
the terminal), then pry the fuse gradually and slowly, but not overexert. If
you feel tight, you can try it at several times and pry the fuse little by little.
When one side of the fuse has been pryzed, then you can get the fuse out
entirely.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment
plug.
6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is
damaged.
CARE AND MAINTENANCE
• Always remove the plug from the power socket.
• Wipe with a soft, damp cloth. Do not use detergents and abrasives.
• Do not allow water or other liquids to enter the internal part of the
motor.
Page 11
Hide quick links:
Advertisement
