Table of Contents
Advertisement
USER SERVICING INSTRUCTIONS
a)Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord.
b)Open fuse cover. Slide open fuse access cover on top of attachment plug towards
blades.(Fig.
1
)
c)Remove fuse carefully. Insert the tip of your tool into fuse slot(close with the terminal),
then prize the fuse gradually and slowly, but not overexert. If you feel tight, you can try
it at several times and prize the fuse little by little. When one side of the fuse has been
prized, then you can get the fuse out entirely.(Fig.
d) Risk of f ire. Replace fuse only with 2.5 Amp, 125 Volt fuse.(Fig.
e)Close fuse cover. Slide closed the fuse access cover on top of attachment plug.(Fig.
f )Risk of f ire. Do not replace attachment plug. Contains a safety device(fuse)that should
not be removed. Discard product if the attachment plug is damaged.
g)When the fan suddenly does not work during normal operation, please check whether it
is a problem with the fuse.
1
NOTE
• When you replace the fuse, please don't operate suddenly or overexert, or else the product will be
damage or cause accident.
• When you feel it hard to be operated, please make sure you have got the right way.
2
13
)
2
)
3
3
4
)
4
Advertisement
Table of Contents
