Missed Approach Mode - Honeywell BENDIXKing xCruze 110 Operating Handbook

Table of Contents

Advertisement

In the event that the GPS sends out a flagged vertical steering
signal, the autopilot will display GS FLG and maintains the current
altitude. This will happen if the current altitude is above the glide
slope. Figure 6.4.6b shows the GS FLG display.

6.4.7. Missed Approach Mode

This mode allows the autopilot to break off from a coupled glide
slope and initiate a 500 fpm climb while maintaining the current
track, but staying in GPSS mode. This mode can only be initiated
while coupled to an LPV glide slope with the display showing GS
CPLD. To use the Missed Approach Mode, toggle the joystick either
up or down while the display shows GS CPLD. Figure 6.4.7a shows
the autopilot in the Missed Approach Mode.
8300-089
Figure 6.4.6a
Figure 6.4.6b
47
Rev 3

Advertisement

Table of Contents
loading

Table of Contents