Table of Contents
Advertisement
6.2.2. Disengaging the autopilot
The autopilot can be disengaged in one of three ways:
1) Press and hold the knob on the face of the autopilot for 1.5
seconds;
2) Press the CWS button (if equipped).
3) Remotely from an EFIS or other systems, which has a connection
to the autopilot (if equipped).
When disengaged, the autopilot will release control of both servos.
An example of a disengaged autopilot is shown in Figure 6.2.2a.
Figure 6.2.2a
8300-089
32
Rev 3
Advertisement
Table of Contents
