Labeling - Metra Electronics GPC Operating Manual

Remember that when operating the METRA GPC the material being fed into the hopper may create excessive pressure.
For the removal of excess air, the cover of the METRA GPC is equipped with a duct flange of 300 mm in diameter
allowing the excess air to be vented.
6.1. The METRA GPC labeling:
The outer surface of each METRA GPC should have a plate attached.
1. Name of the manufacturer;
2. Model and type of the METRA GPC;
3. Designation of technical specifications the METRA GPC corresponds to.
4. Serial number of METRA GPC (Pre-Cleaner).
5. Date (year and month) of manufacture.
Example picture of METRA GPC 2000

6. LABELING

6