Your Camcorder - Sony DCR-SX45 Handycam&reg Handbook

 A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
 A/V connecting cable with S VIDEO
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
A/V Remote Connector
Input
S VIDEO
AUDIO
(Yellow)
Signal flow
VIDEO
(Yellow)
(White)
(Red)
 Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
 Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable  (supplied) or an A/V
connecting cable with S VIDEO
 (sold separately).
Connect your camcorder to the input jacks

of the recording device.
 Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied

with your recording device for details.

When dubbing is finished, stop
the recording device, and then

your camcorder.


Notes
Since dubbing is performed via analog data

transfer, the image quality may deteriorate.
To hide the screen indicators (such as a counter,

etc.) on the screen of the monitor device
connected, touch
others]  [OUTPUT SETTINGS] (under
[GENERAL SET] category)  [DISP
OUTPUT]  [LCD PANEL] (the default
setting) 
To record the date/time or camera settings data,

(MENU)  [Show others] 
touch
[PLAYBACK SET] (under
category)  [DATA CODE]  a desired
setting 
addition, touch
others]  [OUTPUT SETTINGS] (under
[GENERAL SET] category)  [DISP
US

(MENU)  [Show
 
.
[PLAYBACK]
 
. In
(MENU)  [Show