Getting Started; Step 1: Charging The Battery Pack - Sony DCR-SX45 Handycam&reg Handbook

Getting started

Step 1: Charging the battery pack

Battery pack
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.

Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the  mark on the DC plug with that on the DC IN jack.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
CHG (charge) lamp
DC IN jack
DC plug
AC Adaptor
US
1
Power cord
(Mains lead)
To the wall outlet
(wall socket)