Sony DCR-SR220 Handycam&reg Handbook page 51

7
Touch [EXEC]  [YES] 
The still image selection screen appears
again.
To finish printing
Touch on the screen in step 4.

Notes
We can guarantee the operation of only models

that are PictBridge compatible.
Refer also to the instruction manual of the

printer to be used.
Do not attempt the following operations when

is on the screen. The operations may not be
performed properly.
Operate the POWER switch

Press (VIEW IMAGES)

Remove your camcorder from the Handycam

Station
Remove the USB cable from your camcorder,

the Handycam Station, or the printer
Remove the "Memory Stick PRO Duo" from

your camcorder while printing still images
saved on it
If the printer stops working, disconnect the

USB cable, turn the printer off and on again,
and restart the operation from the beginning.
You can select only the paper sizes that the

printer can print.
On some printer models, the top, bottom, right,

and left edges of images may be trimmed. If
you print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may
be trimmed widely.
Some printer models may not support the

date printing function. Refer to your printer's
instruction manual for details.
The still images described below may not be

printed out:
The still image edited by a computer

The still image recorded by another devices

The still image file exceeding 4 MB

The still image file larger than 3,680 × 2,760

pixels
Tips

.
PictBridge is an industry standard established

by the Camera & Imaging Products Association
(CIPA). You can print still images without
using a computer by connecting a printer
directly to a digital video camera or digital still
camera, regardless of model or manufacturer.
You can print a still image on the still image

playback screen by touching
tab  [PRINT].
(OPTION) 
51