Recording - Sony DCR-SR220 Handycam&reg Handbook

Recording

The images are recorded on the media selected on the media setting (p. 20).
The default setting is hard disk for both movies and still images.
(HOME) 
START/STOP 
ACCESS lamp (Hard disk)
/CHG
(charge) lamp
(Movie) lamp/
(Still) lamp

Notes
If the ACCESS lamp is lit or flashing after

recording is finished, it means data is still being
written onto the media. Do not apply shock
or vibration to your camcorder, and do not
remove the battery or AC Adaptor.
The maximum continuous recordable time is

approximately 13 hours.
When a movie file exceeds 2 GB, the next movie

file is created automatically.
(HOME) 
POWER switch 
If the POWER switch is set to OFF (CHG),
turn it while pressing the green button.
Lens cover
PHOTO 
Opens automatically when
the power is switched on.
ACCESS lamp
("Memory Stick PRO
Duo")
 Tips
You can check the recordable time and the

remaining capacity, etc., by touching
(HOME)  (MANAGE MEDIA) 
[MEDIA INFO] (p. 52).
For types of "Memory Stick" you can use in

your camcorder, see page 2.
START/
STOP 
25