Changing The Language Setting - Sony DCR-SR220 Handycam&reg Handbook

To turn off the power
Turn the POWER switch to OFF (CHG).

Notes
If you do not use your camcorder for about

3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p. 97).
It takes a few seconds for your camcorder to

be ready to shoot after the power is turned on.
You cannot operate your camcorder during this
time.
The lens cover opens automatically when the

power is turned on. It closes when the playback
screen is selected, or the power is turned off.
In the default setting, the power turns off

automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p. 69).
 Tips
The date and time do not appear during

recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 64).
Refer to page 91 for information concerning

"World time difference."
If the buttons on the touch panel do not

work correctly, adjust the touch panel
[CALIBRATION] (p. 96).

Changing the language setting

You can change the on-screen displays to
show messages in a specified language.
(HOME) 
Touch
LANG]  [
[CLOCK/
SET], then select the desired language.
18
(SETTINGS) 
LANGUAGE