38MBR: Service Manual
DISASSEMBLY INSTRUCTIONS SIZE 48-58 (CONT)
3
Electrical
parts
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Remove the electrical parts
1) Complete steps 5 - 6 in
section 1 and section 2.
2) Disconnect the fan motor
connector (5p, white) from
the IPM board.
3)
Disconnect the following
eight (8) connection wires
and connectors between
the IPM and the other parts.
IPM board
55
Right-rear panel
screws
DC Fan
PCB board
Driver board