7
Operating instructions
7.1
Procedure to light 10 Litres appliance
7.1.1 Lighting the appliance
▶ Press button fully and keep it pressed.
Fig. 17
▶ After a few seconds press igniter button.
Fig. 18
▶ Release button after approx. 10 seconds.
If the flame does not stay alight.
▶ Repeat the steps above.
If the flame stay alight
▶ Press "ON" button.
Fig. 19
7.1.2 Output control
For higher water temperature (Fig. 20).
▶ Slide to the right will give higher water temperature but use
more gas.
Pilot Ignition – 6 720 886 398 (2021/02)
For lower water temperature (Fig. 20).
▶ Slide to the left will give lower water temperature and use
less gas.
Fig. 20
6720886398-002.1
7.1.3
▶ Turn anti-clockwise
Increases flow and decreases water temperature (Fig. 21).
Fig. 21
6720886398-003.1
▶ Turn clockwise.
Decreases flow and increases water temperature.
Regulating the temperature to the minimum required value
reduces energy consumption.
7.1.4 Shutting OFF the appliance
If no hot water is to be drawn for a longer period of time.
▶ Press OFF button (Fig. 22).
6720886398-004.1
Fig. 22
Low
flame
Consumer temperature/flow adjustment
Turn hot water tap on fully when using.
Operating instructions
High
flame
6720886398-005.1
17