Advertisement
FUNCTION
TEMPORARY CHANGE OF
DIALING MODE (TONE /
PULSE)
SETTING THE RINGER
VOLUME
SETTING THE RINGER
MELODY
SETTING THE HANDSET
VOLUME
STORING PHONE NUMBERS
IN MEMORIES
USING THE MEMORIES TO
MAKE A CALL
REDIAL
Quick Reference Guide
PROCEDURE
After establishing a call, change to TONE by pressing the
key (for example to use telebanking services).
Lift the handset and press the PROG key
+
Enter one of the following codes:
...
51 (low vol.), 52 (medium vol.) or 53 (high vol.)
Press the PROG key
Listen for the confirmation tone (long beep)
Replace the handset
Lift the handset and press the PROG key
+
Enter one of the following codes:
...
61 (melody 1), 62 (melody 2) or 63 (melody 3)
Press the PROG key
Listen the confirmation tone - long beep
Hung up
Lift the handset and press the PROG key
+
Enter one of the following codes:
...
91 (normal vol.) or 92 (high vol.)
Press the PROG key
Listen for the confirmation tone (long beep)
Replace the handset
Lift the handset and press the PROG key
+
One-touch mem.: press the desired one-touch memory
key
or
Two-touch mem.: press the MEM key followed by the
+
desired two-touch memory key
...
Enter the phone number to be stored
Press the PROG key
Listen for the confirmation tone (long beep)
Replace the handset
Lift the handset
One-touch mem.: press the desired one-touch memory
key
or
Two-touch mem.: press the MEM key followed by the
+
desired two-touch memory key
To redial the last number dialed, press the REDIAL key
54
Advertisement
