Bosch ACS 653 Repair Instruction page 109

Plumbing and Mechanical
ACS 653, ACS 663 Service Manual
OIL INJECT 2 (POE) PROCESS
The oil injection is an automatic process. During the charge setup, the operator must enter the amount of oil, viscosity,
type of oil wanted and the ambient temperature. The machine injects the oil automatically (with HP port only) adding
the amount discharged with amount input by user. The system being serviced must have a vacuum to pull oil from
the oil POE inject bottle.
Figure 4-17. Oil Inject 2 (POE)
109
Robert Bosch GmbH SP00D00624 2021-04-08