RM-4/RM-5
Troubleshooting Instructions
1 Select the wanted modulation. Random if a GSM tester is used, so that you can
synchronise the burst.
2 Only high mode is possible
3 Tune the highlighted values to the wanted power
4 Tune base level to –27dBm
5 Stop
6 Select where to save the values, one, both or no one can be selected.
7 Yes. That's the only way to end tuning.
ISSUE 1 02/2004
Figure 33: GSM1800 TX power level tuning window
Figure 34: Stop TX power level tuning dialogue
COMPANY CONFIDENTIAL
Copyright © 2003 Nokia. All Rights Reserved.
CCS Technical Documentation
49