Nokia RM-4 Troubleshooting Instructions page 47

RM-4/RM-5
Troubleshooting Instructions
1 Select Tx PA Mode low and tune the high lighted values.
2 The base level coefficient is taken from the high mode. Do not change it.
3 Calculate and select Stop
If you are satisfied with the coefficients and the power, then save to the Permanent memory.
You can also save the table to the PC, so that you can load it to an other phone. Or you can
select not to do anything by removing both ticks.
Only way to end the tuning session is with Yes
ISSUE 1 02/2004
Figure 29: TX power level tuning 3
Figure 30: Stop TX power level tuning dialogue
COMPANY CONFIDENTIAL
Copyright © 2003 Nokia. All Rights Reserved.
CCS Technical Documentation
47