3. TECHNICAL BRIEF
Trickle Charging
Trickle Charging of the main battery, enabled through SBI control and powered from VDD, is provided
by the PM6658 IC, The trickle charger is on-chip programmable current source that supplies current
from VDD to pin (VBAT). Trickle charging can be used for lithium-ion and nickel-based batteries, with
its performance specified below (3.2V). The charging current is set to 80mA.
Parameter
Trickle Current
[Fig. 3.13] PM6658 Trickle Charging Block Diagram
LGE Internal Use Only
Min
Typ
60
80
- 48 -
Max
100
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Unit
mA