LG KF700Q Service Manual page 100

Bluetooth RF Test procedure
1. Set phone to bluetooth test-mode.
- Enter Test Mode(3845#*700#)
2. Insert a phone in a TEMCELL (in case of radiation test)
3. Set 'discover' after push menu button of the tester and select the link analyzer.
4. After 'set test mode', confirm the connection state.
5. Measure the power of full channel after hopping mode is selected to 'ON'
6. You can select wanted test cases after getting an optimized power
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
→ →
Module Test Set BT DUT
- 101 -
4. TROUBLE SHOOTING
→
BT DUT ON
LGE Internal Use Only