Hoover HI 148 Instruction Book page 22

40002960Eng.qxd 12/04/2005 15:11 Page 22
Départ/Pause
Départ
To start a programme press this button once. The Porte Sécurisée light will
illuminate. The machine will now be sensing the wash load and ask you to
please wait.
Example:
SETTING WASHING
PARAMETERS:PLS WAIT.
The Inter@ct panel will then display the time to complete the programme and
then the wash cycle will start. Inter@ct calculates the time to the end of the
selected programme based upon a standard 7 Kg load. During the cycle,
Inter@ct corrects the time to that applicable to the size and composition of
the load.
Example:
TIME TO END H M
1 30
WASHING
19:30
This display also shows the current phase of the cycle and in the bottom right
hand corner, the current time is displayed.
This display will change throughout the wash programme as the cycle
progresses.
Pause
The programme may be paused at any time during the wash cycle by holding
down the Départ/Pause button for about two seconds. A beep will then sound
and a message will appear on the display to inform you that the programme
has been paused.
Example:
WHITE COTTON
PROGRAMME PAUSED
To restart the programme press the Départ/Pause button once again. The
display will inform you that the programme will continue.
22