Hoover HI 148 Instruction Book page 20

40002960Eng.qxd 12/04/2005 15:11 Page 20
Exit Menu
If you are happy with the settings you have selected, you can now exit the
menu by selecting YES via the Extra Rinçage button and confirm this selection
using the Super Rapide button. However, if you are not happy with some of
the settings selected you must select NO and you can then start programming
again from the beginning. By pressing the Super Rapide button you can enter
and bypass each option individually until you reach the option you would like
to change.
When you are completely satisfied with the menu options you have selected,
you may exit the menu. Testing of the installation may now start. If you wish
to change any of the menu settings at a later date, you can enter the menu as
previously described, run through the menu options from the beginning and
change whichever options you wish. This may be useful for changing Set New
Time when Daylight Saving starts or ends.
Once set, the menu options will remain in the memory of the machine even if
the machine is unplugged or there is a power cut.
20