Removing & Installing Body Components
Seat
Prongs
Guide
Stays
Stays
46
Seat
►
#
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the seat up and back.
#
Installation
1. Insert the prongs into the stays on the frame..
Seat
2. Push forward and down on the rear of the seat
until it locks in place.
Make sure that the seat is locked securely in
position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key under the seat.
Seat lock
Ignition key