Removing & Installing Body Components; Battery - Honda UNICORN CBF160A 2020 Manual

Removing & Installing Body Components

Battery

Negative terminal
Battery
Positive terminal
Bolt
Battery holder
#
Removal
Make sure the ignition switch is in the OFF
position.
1. Remove the left side cover. 2 P. 47
2. Remove the battery holder by removing the
bolt.
3. Disconnect the negative
battery.
4. Disconnect the positive
battery.
5. Remove the battery taking care not to drop
the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive
Make sure that bolts and nuts are tight.
For proper handling of the battery, see
"Maintenance Fundamentals." 2 P. 32
"Battery Goes Dead." 2 P. 77
terminal from the
terminal from the
terminal first.
43