Maintenance; Engine Disassembly - Daewoo D1146 Maintenance Manual

3. MAINTENANCE

3.1. Engine Disassembly

3.1.1. Heed at disassembly
Before disassembly, the part shelf should be prepared for various tools and repair
parts.
When assembling, clean empty hand should be used and clean environment
maintained.
In case of storing the disassembled parts, each part should not touch each other.
In case of disassembly, the parts should be laid in order.
3.1.2. Oil level gauge
Pull out the oil level gauge.
3.1.3. Cooling water
Remove the radiator cap. Open the drain
valve at the radiator lower part to drain the
coolant as the right figure.
CAUTION:
When removing radiator filler cap while
the engine is still hot, cover the cap with a rag,
then turn it slowly to release the internal
steam pressure. This will prevent a person
from scalding with hot steam spouted out
from the filler port.
Remove the drain plug from the cylinder
block and drain out the cooling water into a
container.
Drain valve
33
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
P1024a
Drain plug
Printed in Jan. 2001 PS-MMA0415-E1A