Safety And Environment Instructions - Beko QL22 User Manual

Table of Contents

Advertisement

Available languages

Available languages

2.

Safety and environment instructions

This section provides the safety
instructions necessary to prevent the
risk of injury and material damage.
Failure to observe these instructions
will invalidate all types of product
warranty.
Intended use
WARNING:
Keep ventilation openings,
A
in the appliance enclosure or
in the built-instructure, clear
of obstruction.
WARNING:
Do not use mechanical
devices or other means
A
to accelerate the defrosting
process, other than those
recommended
manufacturer.
WARNING:
A
Do
refrigerant circuit.
WARNING:
Do
appliances inside the food
A
storage compartments of the
appliance, unless they are of
the type recommended by
the manufacturer.
This appliance is intended to be used
in household and similar applications
such as
– staff kitchen areas in shops, offices
and other working environments;
– farm houses and by clients in
hotels, motels and other residential
type environments;
– bed and breakfast type
environments;
– catering and similar non-retail
applications.
by
not
damage
not
use
electrical
1.1. General safety
This product should not be used
by persons with physical, sensory
and mental disabilities, without suf-
ficient knowledge and experience
or by children. The device can only
be used by such persons under su-
pervision and instruction of a person
responsible for their safety. Children
should not be allowed to play with
this device.
In case of malfunction, unplug
the device.
After unplugging, wait at least 5
minutes before plugging in again.
Unplug the product when not in
use.
Do not touch the plug with wet
the
hands! Do not pull the cable to plug
off, always hold the plug.
Do not plug in the refrigerator if
the
the socket is loose.
Unplug the product during ins-
tallation, maintenance, cleaning and
repair.
If the product will not be used for
a while, unplug the product and re-
move any food inside.
Do not use the product when the
compartment with circuit cards lo-
cated on the upper back part of the
product (electrical card box cover)
(1) is open.
4
EN

Advertisement

Table of Contents
loading

Table of Contents