Haier HWD8040BW1 User Manual page 7

Control panel-function buttons
1.4 Function buttons
1-2
The function buttons (Fig. 1-2) enable additional op-
tions in the selected programme before programme
Delay Dry Wash Spin Extra Time/Air Start/Pause
On / Off Temp Speed Rinse Dry
start. The related indicators are displayed.
By switching off the appliance, all options are disabled.
If a button has multiple options, the desired option can
be selected by touching the button sequentially.
To delete the setting or to cancel the setting process,
press the function button,
Not all functions are available for all programmes.
Note: Factory settings
there is no special requirement default settings are recommended.
1.4.1"Start/Pause" button
1-3 1-4
Touch this button (Fig. 1-3) gently to start or inter-
rupt the currently displayed programme.
ration,
During a pause also the time display is blinking.
Time/Air
Start/Pause
1.4.2 Function "Time/Air Dry"
Dry
Touch this button (Fig. 1-4) in order to activate /de-
activate the "Time/Air Dry" function.
By touching button sequentially, drying time can be seen
In combination with programme
function sets the drying time.
1.4.3 Function button"Extra rinse"
1-5
1-6
Touch this button (Fig. 1-5) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin.
By touching the button several times one to three ad-
ditional cycles can be selected. They appear in the dis-
Spin
Extra
Speed play with P--0/ P--1 /P--2 /P--3 .
Rinse
1.4.4 Function "Spin Speed"
Touch this button (Fig. 1-6) to change or deselect the
Spin Speed of the programme. If 0 is chosen ,then the
laundry will not spin.
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
the LED switches off.
During ope-
the displayed washing time is blinking.
"Time/Air Dry", this
13
12
1.4.5 Function "Wash Temp"
Touch this button (Fig. 1-7) to change the washing
temperature of the programme.
1.4.6 Function "Dry On/Off"
Knob is in the "Dry+Wash" area, Perform default settings;
Touch "Dry On/Off " button (Fig. 1-8),dry function will be
switched off and only perform wash function.
In conjunction with the "Delay"button,the child lock
function can be switched on/off (see child lock).
1.4.7 Function "Delay"
Touch this button (Fig. 1-9) to start the programme
with a delay. End time delay could be increased in steps
means the cycle will finish in 6 hours and 30 minutes
6:30
Touch "Start/Pause" button to activate the time delay.
The time delay must be longer than the programme run
time. Otherwise the programme will start immediately.
For deactivating the time delay; rotate programme se-
lector.
In conjunction with the "Dry On/Off"button,the child lock
function can be switched on/off (see child lock).
1.4.8 Function "child lock"
This option blocks all panel elements against activa-
tion. After programme start press button "Delay" and
"Dry On/Off" (Fig. 1-10) for 3 seconds simultaneous-
ly; "cLok" is displayed. For unlocking press again the
two buttons.
1.5 Display
If the appliance is on display will light up the actual
status on different sections. The information include
w ashing time, spin speed, tempe rature, etc will appear
(Fig. 1-11).
Control panel-
1-7
1-9
.
Displ ay symbols
1-8
Dry
Wash
On / Off
Temp
Delay
1-10
Delay
Delay Dry
On / Off
1-11
Wash
Dry
Delay Dry Wash Spin Extra Time/Air Start/Pause
On / Off Temp Speed Rinse Dry