Starting / Stopping The Engine - Stihl HT 75 Instruction Manual

3
Adjust the hip belt (3), both shoulder
N
straps (4) and the carrying strap (5).
Squeeze the clip (carrying ring)
N
together to move it up or down the
shaft.
HT 75
Starting / Stopping the
Engine
Controls
4
5
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4 STOP-0 – engine off – ignition is
switched off
5 F – normal run position – the engine
is running or can start
6 START – ignition is switched on –
the engine can start
Symbol on slide control
7
Starting
7
4
N
N
5
3 N
6
N
1
N
g if the engine is cold
e for warm start – also use this posi -
h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Press down the trigger lockout lever
and squeeze the throttle trigger
and hold them in that position.
Move the slide control to START
and hold it there.
Now release the throttle trigger,
slide control and trigger lockout in
that order. This is the starting
throttle position.
8
Set the choke lever (8) to
tion if the engine has been running
but is still cold.
English
8
19