Configure Connection 1 For Bridge - D-Link DSL-G604T Quick Installation Manual

Configure Connection 1 for Bridge

To configure the WAN connection for Bridge, perform the steps listed
below. Some of the settings do not need to be changed the first time the
device is set up, but can be changed later if you choose.
Click the
Connection 1
button to view
the Bridge
Connection
Setup menu
pictured.
Select Bridge
from the Type,
VPI: and VCI: -
if these values
are not correct,
change these
according to
the instruction
of your ISP.
Click the
Apply button
after you have
entered the
account
information.
13