Configure Connection 1 For Pppoe - D-Link DSL-G604T Quick Installation Manual

Configure Connection 1 for PPPoE

To configure Connection 1 for PPPoE, follow the steps listed below.
Some of the settings do not need to be changed the first time the device
is set up, but can be changed later if you choose.
Click the
Connection 1
button to view
the PPPoE
Connection
Setup menu
pictured.
Type the
Username and
Password used
for your account.
Select PPPoE
from the Type,
VPI: and VCI: -
if these values
are not correct,
change these
according to the
instruction of
your ISP.
Click the
Apply button
after you have
entered the
account
information.
11