Images once copied to a computer cannot be viewed on the camera.
Copy them to a folder recognized by the camera, such as "101MSDCF" (page 62).
•
Operate correctly (page 63).
•
"Memory Stick Duo"
Cannot insert a "Memory Stick Duo".
Insert it in the correct direction (
•
Cannot record on a "Memory Stick Duo".
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
•
the LOCK position. Set the switch to the recording position (page 90).
The "Memory Stick Duo" is full. Delete unnecessary images (
•
Insert a "Memory Stick PRO Duo" (page 22) when recording movies with the image size set
•
to [640(Fine)].
Cannot format a "Memory Stick Duo".
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
•
the LOCK position. Set the switch to the recording position (page 90).
You have formatted a "Memory Stick Duo" by mistake.
All the data on the "Memory Stick Duo" is deleted by formatting. You cannot restore it. We
•
recommend that you set the write-protect switch on the "Memory Stick Duo" to the LOCK
position to prevent accidental erasure (page 90).
PictBridge compliant printer
A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the USB cable again. If an error message is indicated on the printer,
•
refer to the operating instructions supplied with the printer.
84
step 3 in "Read This First").
t
(Setup) menu (page 52).
step 6 in "Read This First").
t