Airmini App General Information; What Is The Airmini App; The Airmini App Says That The Airmini Machine Was Not Used The Previous Night When My Patient Did Use It. What Should I Do; Do My Patients Need A Smart Device And The App To Operate The Device - ResMed AirMini Faq

8. AirMini app General Information

8.1. What is the AirMini app?

The AirMini app works with the AirMini machine to provide a rich and engaging therapy experience for
patients. It can be used to start and stop the machine, display usage hours, mask seal, events per
hour, mask on/off events, 95th percentile pressure, therapy score and allows changes to settings.
The previous 30 days of this data is available to view by the patient via the AirMini app.
8.2. The AirMini app says that the AirMini machine was not used the
previous night when my patient did use it. What should I do?
Check that:
• Your patient's AirMini machine plugged into power outlet.
• There is a Bluetooth connection between the AirMini machine and the smart device.
• Ensure that you have phone close to his machine.
• Ensure that the LED on the machine for the Bluetooth is blue. If the LED is white it means that
the machine is in Airplane mode. If so, the patient needs to tap the Bluetooth LED and that
shall disable the Airplane mode.
8.3. Do my patients need a smart device and the app to operate the
device?
The AirMini machine does not require a smart device to run therapy. However, if the patient would
want to view their sleep data and adjust their comfort settings, a smart device with the AirMini app
would be required for this enriched experience.
8.4. My patient's AirMini app displayed an error message. What should I
do?
Please refer to the AirMini troubleshooting guide for more information about specific error messages.

8.5. How do I access clinical mode from the patient screen?

To access clinical mode from the patient screen, you must open the Bluetooth® pairing screen by
pressing the Bluetooth® icon in the top right corner of the patient Dashboard. From the Bluetooth®
pairing screen, using two fingers, press and hold the ResMed and AirMini logos simultaneously for at
least 3 seconds.

8.6. Does the AirMini app work with AirSense10 machine?

No, the AirMini app does not work with an AirSense10 machine. If your patient has a ResMed
AirSense10 machine, then he can use myAir™ to track his CPAP treatment.

8.7. How does the AirMini app calculate the therapy score?

The AirMini app calculates your patient's score by analysing his nightly therapy data. A higher score
is a general correlates to a better night sleep. He will get points based on the following four key
categories:
ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia ResMed.com (17)