With Slipping Function Type
Clutch Drum
11-4 Grease Supply to Gear Case
Supply grease from
here to beginning see.
Grease Fitting
11. Unit Service Guide
Mounting Bolt
Gear Case
Gear Wrench
Gear Case
With Slipping Function Type:
Remove the mounting bolt, then remove the clutch
drum.
NOTE:
・ ・ ・ ・
The mounting bolt is a left-hand thread.
・ ・ ・ ・
When installing the clutch drum, note the
direction that the wave washer attaches.
Set the grease gun to the grease fitting, and supply
grease from the tip of the gear case to beginning see.
Specified grease:
Grease for lithium heatproof system (#2)
NOTE: When using Husqvarna Zenoah genuine
power grease, remove the grease nipple from
the gear case. Screw in the container point of
grease, and supply grease.
28