Connection Information; Deleting The Registration - Smeg SF4303WMCX Manual

2.7 Connection information

The following information about the
connection can be found in the Connectivity
and Other Info menu of the App:
• Appliance registration date
• Network name
• Strength of the Wi-Fi signal
• Mac address of the connectivity card
• Firmware version of the connectivity
card
• IPv4 and IPv6 network addresses
• SW Compliance ID (identification of
compliance with the essential
requirements of the RED directive).

2.8 Deleting the registration

To delete the registration of the appliance
Go to the Connectivity and Other Info
menu in the product Settings menu of the
App and follow the instructions.
The product can be registered again
following the procedure described
above.
To delete the user registration
• Go to the My account menu on the App
and follow the instructions.
32
Use
To cancel the registration of the appliance
on the product:
1. Touch the SETTINGS
main menu display on the appliance.
2. Select
3. Touch the ENTER button.
4. Touch the REGISTRATION
5. Touch the DELETE
6. Touch the CONFIRM
confirm that you wish to cancel the
registration.
This procedure only deletes the
registration and restores the factory
settings for the SmegConnect menu.
The appliance does not need to be
connected to the cloud to delete the
registration on the appliance.
The deletion is only local. Remember
to delete the registration on the App
as well.
The product can be registered again
following the procedure described
above.
button on the
SmegConnect.
button.
button to
button.