Table of Contents
Advertisement
9)
At the "Install Message for Monitoring Utility," shown in 0, enter an appropriate
name for the "Server Description" and complete the "IP address" information
and then click "Next". Click "Next" if the information is already correct. Contact
your system administrator if you do no know the IP address.
Note
:
When asked for an IP address during the installation or log process, always
use the IP address for the system that contains the remote PAM compatible array
that you wish to monitor. If you are installing PAM on the same workstation that
contains a PAM compatible array then use the default IP address (127.0.0.1).
Install Message Server for Monitoring Utility Window
10) Complete the "Add User Account for Administration" information, see 0. You
may accept the default name or you may enter a new name in the "Name" field.
Enter a password in the "Password" field and enter the same password in the
"Confirm Password" field. Click "Next" after you have completed all of the
fields.
Mainboard Features
53
Advertisement
Table of Contents
