Page of 42

Biostar U8668-D User Manual

Biostar u8668-d motherboard: user guide.
Also See for U8668-D:
Manual - 71 pages
Setup manual - 32 pages
U
8
6
6
8
-
D
U 8
8 6
6 6
6 8
8 -
- D
D
U
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are
designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
of
warranties
merchantability or fitness for any purpose. Further the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user's
manual. All the brand and product names are trademarks of their
respective companies.
i

   Also See for Biostar U8668-D

   Related Manuals for Biostar U8668-D

   Summary of Contents for Biostar U8668-D

  • Page 1

    FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits designed provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 2: Table Of Contents

    Component Index ...4 CPU Installation...5 DDR DIMM Modules: DDR1-2 ...6 Jumpers, Headers, Connectors & Slots ...7 ESPAÑOL ... 13 Características del U8668-D ...13 Contenido del Paquete ...14 Disposición del U8668-D ...15 Indice de los Componentes...16 Instalación de la CPU...17 Módulos DDR DIMM: DDR1-2 ...18 Puentes, Cabezales, Conectores &...

  • Page 3: English, U8668-d Features

    English U8668-D Features Provides Socket-478. Supports the Intel Pentium 4 processor up to 3.06GHz. Running at 400/533MHz Front Side Bus. Supports Hyper-Treading. Chipset North Bridge: P4M266A South Bridge: VT8235. Main Memory Supports up to 2 DDR devices. Supports 200/266MHz DDR devices.

  • Page 4: Package Contents

    Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers. Supports 1 serial port. Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode) Supports PS/2 mouse and PS/2 keyboard. Supports 2 back USB2.0 ports and 4 front USB2.0 ports. BIOS AWARD legal Bios. Supports APM1.2.

  • Page 5: Layout Of U8668-d

    Layout of U8668-D JKBMS1 & Mouse JCOM1 JVGA1 Super JUSBLAN1 & JAUDIO JAUDIO1 Codec JGAME1 JSPDIFO1 JWOL1 JCDIN1 AMR1 Soket 478 P4M266A AGP1 JUSB2 PCI1 PCI2 FDD1 JATXPWR1 JCI1 JPANEL1...

  • Page 6: Component Index

    Component Index Super BIOS Codec JGAME1 A. Back Panel Connectors B. Front Audio Header (JAUDIO1) C. Front USB Header (JUSB2) D. PCI Slots (PCI1-2) E. GAME Header (JGAME1):optional F. Wake OnLAN Header (JWOL1) G. CD-ROM Audio-In Header (JCDIN1) H. AMR Slot (AMR1) I.

  • Page 7: Cpu Installation

    CPU Installation CPU Fan 1. Pull the lever sideways away from the socket then raise the lever up to a 90-degree angle. 2. Locate Pin A in the socket and look for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.

  • Page 8: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module.(184 pin) DIMM Socket DDR Module Location DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB The list shown above for DRAM configuration is only for reference.

  • Page 9: Jumpers, Headers, Connectors & Slots

    Peripheral Component Interconnect Slots: PCI1-2 This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

  • Page 10

    Power Connectors: JATXPWER1/ JATXPWR2 JATXPWR2 (ATX 12V Power Connector) (ATX Main Power Connector) JATXPWR1 Assignment +3.3V +3.3V Ground Ground Ground PW_OK +5V_SB +12V JATXPWR2 Assignment JATXPWR1 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground Assignment Ground Ground...

  • Page 11

    Front Panel Connector: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button ==> Infrared Conn. ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button Clear CMOS Jumper: JCMOS JCMOS Assignment Normal Pin 1-2 on...

  • Page 12

    Audio Subsystem: JAUDIO1/ JCDIN1 JAUDIO1 JAUDIO1 (Front Audio Header) (Front Audio Header) Assignment Mic In Mic Power RT Line Out Reserved LFT Line Out ! JF_AUDIO1 only support 2CH. Front Panel Audio Connector/ Jumper Block Jumper Setting Pin 5 and 6 Audio line out signals are routed to Pin 9 and 10 the back panel audio line out connector.

  • Page 13

    Game Header: JGAME1 Pin Assignment Pin Assignment MIDI-OUTR MIDI-INR Digital Audio Connector: JSPDIFO1 SPDIF_Out JSPDIF_OUT Wake OnLAN Header :JWOL1 Ground JWOL1 JGAME1 Ground Ground Wake up...

  • Page 14

    Case Open Connector: JCI1 JCI1 No jumper installed Pin 1-2 on Back Panel Connectors JKBMS1 JPRNT1 PS/2 Parallel Mouse PS/2 COM1 Keyboard JUSB1 JCOM1 Assignment Assignment Normal Normal Operation Operation (default) (default) Case Open JUSBLAN2 JVGA1 JAUDIO Line In Speaker Out Mic In...

  • Page 15: EspaÑol, Características Del U8668-d

    Español Características del U8668-D Proporciona Socket-478. Soporta procesador Intel Pentium 4 de hasta 3.06GHz. Corre a 400/ 533MHz Front Side Bus. Soporta Hyper-Threading. Chipset North Bridge: P4M266A South Bridge: VT8235. Memoria Principal Soporta hasta 2 dispositivos DDR. Soporta dispositivos DDR de 200/ 266MHz.

  • Page 16: Contenido Del Paquete

    Soporta 1 puerto serie. Soporta 1 puerto paralelo multi-mode. (modo SPP/EPP/ECP) Soporta ratón PS/2 y teclado PS/2. Soporta 2 puertos USB2.0 traseros y 4 puertos USB2.0 frontales. BIOS AWARD legal Bios. Soporta APM1.2. Soporta ACPI. Soporta función USB. Sistemas Operativos Ofrece el más alto funcionamiento para MS-DOS, Windows 2000, Windows Me, Windows XP, SCO UNIX etc.

  • Page 17: Disposición Del U8668-d

    Disposición del U8668-D JKBMS1 Teclado & Raton JCOM1 JVGA1 Super JUSBLAN1 & JAUDIO JAUDIO1 Codec JGAME1 JSPDIFO1 JWOL1 JCDIN1 AMR1 Soket 478 P4M266A AGP1 JUSB2 PCI1 PCI2 FDD1 JATXPWR1 JCI1 JPANEL1...

  • Page 18: Indice De Los Componentes

    Indice de los Componentes Super BIOS Codec JGAME1 A. Conectores del Panel Trasero B. Cabezal Frontal de Audio (JAUDIO1) C. Cabezal Frontal USB (JUSB2) D. Ranuras PCI (PCI1-2) E. Cabezal de Juego (JGAME1):opcional O. Conectores IDE (IDE1-2) F. Cabezal Wake On LAN (JWOL1) G.

  • Page 19: Instalación De La Cpu

    Instalación de la CPU CPU Fan 1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. 2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU.

  • Page 20: Módulos Ddr Dimm: Ddr1-2

    Módulos DDR DIMM: DDR1-2 DRAM Tiempo de Acceso: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM.(contactos 184) Localización del Módulo DDR Socket DIMM DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB La lista de arriba para la configuración DRAM es solamente para referencia.

  • Page 21: Puentes, Cabezales, Conectores & Ranuras

    Puentes, Cabezales, Conectores & Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...

  • Page 22

    Conectores de Corriente: JATXPWER1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) (ATX Conector de Corriente Principal) JATXPWR1 Contacto Asignación +3.3V +3.3V Tierra Tierra Tierra PW_OK +5V_SB +12V JATXPWR2 Contacto Asignación Contacto Asignación JATXPWR1 Contacto Asignación +3.3V -12V Tierra PS_ON Tierra Tierra Tierra Tierra...

  • Page 23

    Conector del Panel Frontal: JPANEL1 PWR_LED (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Puente de Borrar CMOS: JCMOS JCMOS Contacto...

  • Page 24

    Subsistema de Audio: JAUDIO1/ JCDIN1 JAUDIO1 (Cabezal Frontal de Audio) Contactos Asignacion Entrada del MIC Corriente del MIC RT Salida de Linea Reservado LFT Salida de Linea ! JAUDIO1 solamente soporta 2CH. Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting La senal de salida de linea del Audio Contacto 5 &...

  • Page 25

    Cabezal de Juego: JGAME1 Contactos Asignacion Contactos Asignacion MIDI-OUTR MIDI-INR Conector Digital de Audio: JSPDIFO1 Cabezal Wake On LAN: JWOL1 Conector de la Carcasa Abierta: JCI1 JCI1 Puente sin instalar Contacto 1-2 on JGAME1 SPDIF_Out JSPDIF_OUT Tierra 5V_SB Wake up JWOL1 Asignacion Operacion...

  • Page 26

    Conectores del Panel Trasero JKBMS1 JPRNT1 Raton PS/2 Paralelo JUSB1 Teclado COM1 PS/2 JCOM1 JUSBLAN2 VGA1 JVGA1 JAUDIO Entrada de Linea Salida del Altavoz Entrada del Mic...

  • Page 27: FranÇais, Caractéristiques De U8668-d

    Français Caractéristiques de U8668-D Offre les Socket-478. Supporte le processeur Intel Pentium 4 jusqu’à 3.06GHz. Fonctionnant en Bus Frontal de 400/ 533MHz. Supporte Hyper-Threading. Chipset North Bridge: P4M266A South Bridge: VT8235. Mémoire Principale Supporte jusqu’à 2 matériels DDR. Supporte des matériels DDR en 200/266MHz.

  • Page 28: Contenu De L'emballage

    Périphériques Internes Supporte les lecteurs de disquettes 360K, 720K, 1.2Mo, 1.44Mo et 2.88Mo. Supporte 1 port série. Supporte 1 port parallèle multi-mode. (mode SPP/EPP/ECP) Supporte souris PS/2 et clavier PS/2. Supporte 2 ports USB2.0 arrières et 4 ports USB2.0 avants. BIOS AWARD legal Bios.

  • Page 29: Dessin D'u8668-d

    Dessin d’U8668-D JKBMS1 & Mouse JCOM1 JVGA1 Super JUSBLAN1 & JAUDIO JAUDIO1 Codec JGAME1 JSPDIFO1 JWOL1 JCDIN1 AMR1 Soket 478 P4M266A AGP1 JUSB2 PCI1 PCI2 FDD1 JATXPWR1 JCI1 JPANEL1...

  • Page 30: Warpspeeder

    WarpSpeeder...

  • Page 31: Introduction, System Requirement, Installation

    Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.

  • Page 32: Usage

    “Finish” button. Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon:...

  • Page 33

    Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure.

  • Page 34

    Man walking => overclock percentage from 100% ~ 110 % Panther running => overclock percentage from 110% ~ 120% Car racing => overclock percentage from 120% ~ above 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure.

  • Page 35

    4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.

  • Page 36

    Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock by click the Verify button.

  • Page 37

    “Auto-overclock button”: User can click this button and [ WarpSpeeder™ ] will set the best and stable performance and frequency automatically. [ WarpSpeeder™ ] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting.

  • Page 38

    5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.

  • Page 39

    Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions.

  • Page 40: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning.

  • Page 41: SoluciÓn De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...

  • Page 42

    03/25/2003...

Comments to this Manuals

Symbols: 0
Latest comments: