Starting Cold Engine - Shindaiwa 600sx Operator's Manual

600SX
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.

Starting Cold Engine

Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever (A) fully
forward to lock chain brake
before starting.
2. Fill the fuel tank with fuel
mixture. It is not permitted to fill
fuel above the shoulder level of
fuel tank.
3. Fill the chain oil tank with
lubricant. Do not over fill.
4. Move stop switch (B) to "Run"
position.
X7503265506
© 12/2020 ECHO Incorporated
OPERATION
B
A
29