The Servo Driver Connection And The Connection Blocking-Off - Omron OMNUC W Series User Manual

Chapter 4 The way of operating
4-2

The servo driver connection and the connection blocking-off

■ Servo driver connection ■
■ ■
To connect with servo driver , it operates by the following procedure.
1. Clicks 【Scan Servo Driver】 from 【Operation】 menu.
The following screen is displayed.
It chooses a connection model and it clicks 【OK】.
2.
A connection screen is displayed and a basic screen is displayed.
■ ■ ■ ■ Servo driver connection blocking-off
To block off with the servo driver, connecting, it operates by the following procedure.
･ Click 【Exit】 from【File】 menu.
It closes a working parameter file and it interrupts communication with the
servo driver.
･ Click 【Go Offline】from 【Operation】 menu.
It displays a working parameter file and it interrupts communication with the
servo driver.
The parameter file which is working by the offline mode can be edited.
4-3